Webseiten-Werkzeuge


meshcore:lora_hardware:elecrow_thinknode_m4

Dies ist eine alte Version des Dokuments!


Electrow ThinkNode M4

„Wer ein Bild hat, bitte einstellen. HINWEIS: Bitte nur selbst erstelle Bilder einstellen! (Urheberrecht)“

Dieses Device kann zusammen mit der MeshCore Firmware als Companion Radio, als Repeater oder auch als Roomserver verwendet werden.

Zusammenfassung

-



Spezifikationen

  • Power Bank
    • Fast charging protocol
      • PPS output
      • QC2.0 output, QC3+/QC3.0 output
      • PD3.1 input/output
      • SCP/FCP/AFC input/output
    • Integrated: High-precision electricity meter
    • Switch charging: Support single-cell charging, including trickle current, constant current, constant voltage, charge cutoff, and recharge complete charging cycle management
    • Synchronous Boost: Output power up to 20W
  • LoRa Communication
    • CPU/SoC: nRF52840-QIAA (Nordic)
    • System Memory: 256 KB RAM
    • Storage: 3 MB Flash memory (external 2M Flash chip)
    • Firmware: Meshtastic firmware compatible, LoRa Tracker function compatible(Optional)
    • LoRa Transceiver: Semtech LR1110
  • Charge and discharge function (charge three units at the same time)
    • Type-C port:
      • Input: 5V/3A, 9V/2A, 12V/1.5A
    • Type-C Cable:
      • Discharge function:
        • Output: 5V/3A, 9V/2A, 12V/1.5A
    • Wireless charging:
      • Discharge function:
        • Output: 5W, 7.5W, 10W, 15W
    • Charging time: 3~4 Hour
  • Wireless Communication
    • Bluetooth: Bluetooth Low Energy and Bluetooth 5.4, internal antenna (phone configuration)
    • LoRa: LR1110 LoRa Transceiver, US 915MHz / EU 868MHz (Internal antenna)
  • Battery
    • Type: 18650 Lithium-ion Battery
    • Nominal capacity: 7000mAh (can be taken on airplanes)
    • Power: 3.6V/25.2Wh
    • Rated capacity: 3800mAh (5V/3A)
    • Conversion Rate: More than 74%
  • Hardware
    • Power button (power bank): Touch a button to wake up the device or turn on the light
    • LoRa/Bluetooth function Button: Touch a button to enable/disable the LoRa function, and turn on/off the Bluetooth function.
    • Emergency Lights: Built-in LED strong light, three lighting effects (lighting, strong light, flashing)
    • Charging cable: Comes with dual cables (Type-C). One for charging, one for programming.
    • Magnetic charging: Compatible with Apple's MagSafe charging.
    • GPS positioning: Support GPS, BeiDou, GLONASS, QZSS, built-in ceramic antenna
    • Protection: Yes
    • Flashing function: Yes
  • Other
    • Sensor: Temperature and humidity sensors and a six-axis gyroscope
    • Power Input: 5~12V, Type-C interface
    • Power consumption:
      • Working static power consumption: 45mA
      • Sleep power consumption: 55uA(LORA module: 15.95uA, power bank module: 40uA)
      • Maximum working current: Send 175mA, receive 54mA
    • Storage Temperature: -20~45 °C
    • Operation Temperature: 0°C ~ 40°C
    • Size: 87.3*67.7*28mm
    • Enclosure: ABS fireproof plastic+PC+TPE
    • Using Method: Magnetic, handheld, lanyard
    • Weight: 190g
meshcore/lora_hardware/elecrow_thinknode_m4.1795152450.txt.gz · Zuletzt geändert: von mellinux