Webseiten-Werkzeuge


meshcore:lora_hardware:elecrow_thinknode_m4

Electrow ThinkNode M4

„Wer ein Bild hat, bitte einstellen. HINWEIS: Bitte nur selbst erstelle Bilder einstellen! (Urheberrecht)“

Dieses Device kann zusammen mit der MeshCore Firmware als Companion Radio, als Repeater oder auch als Roomserver verwendet werden.

Zusammenfassung

-

Spezifikationen

  • Power Bank
    • Fast charging protocol
      • PPS output
      • QC2.0 output, QC3+/QC3.0 output
      • PD3.1 input/output
      • SCP/FCP/AFC input/output
    • Integrated: High-precision electricity meter
    • Switch charging: Support single-cell charging, including trickle current, constant current, constant voltage, charge cutoff, and recharge complete charging cycle management
    • Synchronous Boost: Output power up to 20W
  • LoRa Communication
    • CPU/SoC: nRF52840-QIAA (Nordic)
    • System Memory: 256 KB RAM
    • Storage: 3 MB Flash memory (external 2M Flash chip)
    • Firmware: Meshtastic firmware compatible, LoRa Tracker function compatible(Optional)
    • LoRa Transceiver: Semtech LR1110
  • Charge and discharge function (charge three units at the same time)
    • Type-C port:
      • Input: 5V/3A, 9V/2A, 12V/1.5A
    • Type-C Cable:
      • Discharge function:
        • Output: 5V/3A, 9V/2A, 12V/1.5A
    • Wireless charging:
      • Discharge function:
        • Output: 5W, 7.5W, 10W, 15W
    • Charging time: 3~4 Hour
  • Wireless Communication
    • Bluetooth: Bluetooth Low Energy and Bluetooth 5.4, internal antenna (phone configuration)
    • LoRa: LR1110 LoRa Transceiver, US 915MHz / EU 868MHz (Internal antenna)
  • Battery
    • Type: 18650 Lithium-ion Battery
    • Nominal capacity: 7000mAh (can be taken on airplanes)
    • Power: 3.6V/25.2Wh
    • Rated capacity: 3800mAh (5V/3A)
    • Conversion Rate: More than 74%
  • Hardware
    • Power button (power bank): Touch a button to wake up the device or turn on the light
    • LoRa/Bluetooth function Button: Touch a button to enable/disable the LoRa function, and turn on/off the Bluetooth function.
    • Emergency Lights: Built-in LED strong light, three lighting effects (lighting, strong light, flashing)
    • Charging cable: Comes with dual cables (Type-C). One for charging, one for programming.
    • Magnetic charging: Compatible with Apple's MagSafe charging.
    • GPS positioning: Support GPS, BeiDou, GLONASS, QZSS, built-in ceramic antenna
    • Protection: Yes
    • Flashing function: Yes
  • Other
    • Sensor: Temperature and humidity sensors and a six-axis gyroscope
    • Power Input: 5~12V, Type-C interface
    • Power consumption:
      • Working static power consumption: 45mA
      • Sleep power consumption: 55uA(LORA module: 15.95uA, power bank module: 40uA)
      • Maximum working current: Send 175mA, receive 54mA
    • Storage Temperature: -20~45 °C
    • Operation Temperature: 0°C ~ 40°C
    • Size: 87.3*67.7*28mm
    • Enclosure: ABS fireproof plastic+PC+TPE
    • Using Method: Magnetic, handheld, lanyard
    • Weight: 190g



Diese Anleitung / Übersetzung wurde nach bestem Wissen erstellt, erhebt aber nicht den Anspruch auf Vollständigkeit und Richtigkeit der Angaben und dient lediglich als Hilfestellung.


Diese Seite steht in keinerlei Verbindung zum MeshCore Projekt https://meshcore.io.
Erstellt 2025 für die deutschsprachige MeshCore Community • Impressum • Datenschutzerklärung

meshcore/lora_hardware/elecrow_thinknode_m4.txt · Zuletzt geändert: von mellinux