Webseiten-Werkzeuge


meshcore:lora_hardware:elecrow_thinknode_m5

Dies ist eine alte Version des Dokuments!


Elecrow ThinkNode M5

„Wer ein Bild hat, bitte einstellen. HINWEIS: Bitte nur selbst erstelle Bilder einstellen! (Urheberrecht)“

Dieses Device kann zusammen mit der MeshCore Firmware als Companion Radio, als Repeater oder auch als Roomserver verwendet werden.

Zusammenfassung

-

Spezifikationen

  • Main Processor(ESP32-S3)
    • CPU/SoC: High-performance Xtensa 32-bit LX7 dual-core processor, clocked at up to 240MHz
    • System Memory: 512KB SRAM, 8M PSRAM
    • Storage: 4M Flash, 384KB ROM
    • Firmware: Meshtastic firmware is fully compatible, and the signal is transmitted in LoRa mode
  • EPD(Electronic Paper Display)
    • Size: 1.54 inch-EPD(monochrome ink screen)
    • Display Materials: E-lnk Electronic Ink)
    • Resolution: 200*200 or more
    • Driver Chip: SSD1681 (Via SPI or I2C interface)
    • Global Fresh Time: 2s
  • Wireless Communication
    • Bluetooth: Bluetooth Low Energy and Bluetooth 5.0 (phone configuration)
    • LoRa: SX1262 LoRa Module, US 915MHz / EU 868MHz (External antenna)
  • Hardware
    • Interface: Type-C Interface, RP-SMA Interface
    • Function: GPS Location(GPS, GLONASS, BeiDou, QZSS), EPD Display, RTC, USB2.0, PMU power management (built-in 1200mAh lithium battery), buzzer, etc.
    • Button: Knob Switch, Function Button, Page Turn Button, GPS Switch, Reset Button
    • LED Indicator: Power supply, GPS/LoRa indication
  • Other
    • Power Input: 5V/1A, supports USB or lithium battery power supply
    • Power consumption: The maximum working current is about 340mA (CPU+LoRa module), and the low power consumption is about 34uA
    • Operating Temperature: -10~50°C
    • Storage Temperature: -20~60 °C
    • Relative humidity: 10%-95%, @ 40°C (non-condensing)
    • Size: 82*51.6*26.3mm
    • Enclosure: ABS Plastic
    • Net weight: 81g
meshcore/lora_hardware/elecrow_thinknode_m5.1795080136.txt.gz · Zuletzt geändert: von mellinux